Bout Bloody time i hear you say

[91cb-1]

I've been a member of this site for about 2 years and have had my new -1 for at least a year. still not finished upgrading and playing with it but i suppose i never will be. so here's some long overdue pics. everything's pretty much standard, except for a Hagon rear shock home made rear set brackets and an aftermarket Reg/Rec. I have tank decals in the shed for it but have yet to put them on i'm gonna do it properly and get them laquered on. anyway pics as follow let my know what you think. As you can see it's a big hit with my girlfriends cat 

[Falk]

Hi there - short Question:
What are that for Adapters at the Footrests ?
From which Bike are they?

[Drewski]

Hi there - short Question:
What are that for Adapters at the Footrests ?
From which Bike are they?

I think somebody was making and selling them on here.

[a_morti]

[snip]...home made rear set brackets ...[/snip]

[91cb-1]

Thanks morti yes they are home made, but yes CB1guy was selling them on here he might have some left to sell, i was in contact with him regarding hight and length extension etc etc.

[Falk]

Mhhm Thanks for the Info..


mhhm homemade is stupid here in Germany....

[91cb-1]

how do you mean it's stupid? Is that a brand over there or something?

[Falk]

Nope stupid is that it's very hard to get homemade Parts legal at your Bike....
After mounting Parts, that are not marked with a so called E-Number (like Lights ore some Aftermarket-Mufflers) we have to do a Test-Procedure. and this Procedure for Homemade Parts is normally done in 2 Steps.
1.) You give the Test-Engineer a Set of what you build and they test if it's strong enough to be mounted (sometimes the Thing you gave them breaks)
2.) You mount the Piece and bring your Bike back to the TestEngineer and he's going for a Testride.

Ok - some of the Testengineers keept Step one and just take a Look of what you build. But Step2 is still an expensive one....

[91cb-1]

shit military state's suck. i designed them and got my cousin to produce them from 10ml aluminium so they're as strong s standing on the normal pegs. so if i were to say make a set and brand tem with an "E" number you could use them r does the "E" number actually have to be real

[91cb-1]

And here's some pics of her cleaned up painted and decaled, gettin ready for a sale we hope, fingers crossed;