HONDA CB1 Swingarm

[tamaman6]

hey guys if anyone has a full swing arm in good condition please let me know!! or where i can get one!!

Thanks !!

[a_morti]

hey guys if anyone has a full swing arm in good condition please let me know!! or where i can get one!!

Thanks !!

Where are you? I have one that needs some tidying, but they all will by now. At least with a spare you can tidy it up then fit it at your leisure. Metal brush and hammerite, or take it to your favourite local powdercoaters, they will sand blast and coat it for around £25 but then you need new bearings. Though in honesty that's recommended on a 25 year old bike anyway.

Bearings: 2x 6202 2RS
1 x TA2230Z
About £10 all-in.

[tamaman6]

thansk for the quick reply. Im in Berkshire in the UK. I see your in portsmouth.

How much are you looking for it??

cheers.

[a_morti]

thansk for the quick reply. Im in Berkshire in the UK. I see your in portsmouth.

How much are you looking for it??

cheers.

If you come get it not much at all. If I have to pack it, a little more. Maybe £10 collected / £30 posted? I'm not really up for dragging It to the post office in a rucksack.

[a_morti]

As a thought, we will be driving Portsmouth to Gloucester on Saturday morning / lunchtime. Are you anywhere near a services en route?

[tamaman6]

thing is my cb1 is my main mode on transport lol..

ill speak to a couple of mates see if they can run me down

Just to make sure its the full swingarm yeah?? have you got any photos??


cheers

[a_morti]

thing is my cb1 is my main mode on transport lol..

ill speak to a couple of mates see if they can run me down

Just to make sure its the full swingarm yeah?? have you got any photos??


cheers

Where in Berks are you? Is there a chance we can meet nearer to you?

How do you mean by the full swingarm - do you need a chain guard, spindle, adjusters etc.? What's wrong with yours?

Not got pics yet as it's at my dad's.

[tamaman6]

Im in Ascot - If your taking the M3 im right by bagshot junction

basically mines rotted through / rusted and now the bike sits very low.

The bearings x2 etc you posted before will i need these too???

im not knowledgable with this kinda stuff at all - aslong as i get the part my relative can fit it !!

[tamaman6]

This thing!!

http://www.ebay.co.uk/itm/89-cb400f-cb400-cb1-cb-1-cb-1-swing-arm-swingarm-/220644981507?_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D3%26po%3DLVI%26ps%3D63%26clkid%3D1784583880375798884&_qi=RTM742988

etc

[a_morti]

This thing!!

http://www.ebay.co.uk/itm/89-cb400f-cb400-cb1-cb-1-cb-1-swing-arm-swingarm-/220644981507?_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D3%26po%3DLVI%26ps%3D63%26clkid%3D1784583880375798884&_qi=RTM742988

etc

Wow, I never heard of this part actually rusting through! I hope you are not still riding it?

We will be going up the M3 past Bagshot around 12 midday this Saturday. Drop me a PM with your real name and mobile number we can work something out. The swingarm I have can be fit as is, but ideally you will want to clean it up with a metal brush, and paint with Hammerite or similar as it does have some rust around the suspension bracket. Thing is, they all do as the wheel tends to throw stones at the 'arm and chip the paint.

[tamaman6]

no not riding having to spend a bomb on taxis for work this week.

PM Sent!!

[a_morti]

hey guys if anyone has a full swing arm in good condition please let me know!! or where i can get one!!

Thanks !!

I am <30 minutes from the meeting spot and your phone is switched off.

I don't have time to wait and won't be messed about. If you are late, you miss out and I wish you good luck finding another refurbed swingarm for £25 as this one will be going on dadmorti's bike.

[M.pierce]

Hi,
Is the swingarm still available or did the deal go through?

[a_morti]

Hi,
Is the swingarm still available or did the deal go through?

I was stood up. Where are you and what do you need?

[M.pierce]

London and a complete swingarm, a day trip's a bit out of the way but I will pay for postage and packaging.