Anyone on this list race thier CB-1?

[bbanna]

Just curiou sif there is anyone on this list that races their CB-1?

If so and you are interested in rebuilding your bike, contact me and I may be able to help you get very hard to find parts. Parts like Keihin 32mm FCR flatslide carbs  , HRC MAGTEK magnesium wheels , CBR400RR swing arms or NSR250R swing arms .

Brian

[rscott349]

hi brain
              could you tell me if the cbr 400rr swing arm is just a "BOLT ON JOB".
                 and would i need the rear shock for cbr to
                                          thanks ryan

[bbanna]

Yes, the CBR400RR swing arm is basically a bolt in job. It is a tight fit, but that is OK. It has already been proved to be done. In fact, here is a link to the sight that shows you how it is done and also using the CB-1 shock. I can get you a CB400RR shock, but if you want to use the CB-1 shock, you only need to make a special shock linkage block out of aluminum bar as shown in the article. This is what I will be doing to mine.

http://hondacb1.proboards7.com/index.cgi?board=CB1Discussion&action=display&thread=1155340691

The rear sets need to be modified on the left side. I can get you BEET rear sets for the CB-1 as well.

Brian

[ptlcb1]

bbanna,
     Yes I race mine. Have been since 2000. Pics of my bike are at Hondacb1.com.  Go to the cool rides section. My bike is the one on the right side of that page. What state are you from?  Curious to know a price on the flatside carbs and those Mag wheels...

ptlcb1

[Wally]

Just curiou sif there is anyone on this list that races their CB-1?

If so and you are interested in rebuilding your bike, contact me and I may be able to help you get very hard to find parts. Parts like Keihin 32mm FCR flatslide carbs  , HRC MAGTEK magnesium wheels , CBR400RR swing arms or NSR250R swing arms .

Brian

do you have a Japan connection (other than isicar or okshon)?
I honestly dont have a CB1, but I have 3 RVF400's and  CBR400 (NC29). There are several of us here in the bay area (I'm next to Santa Cruz, Ca) that ride/ race the grey market bikes and are always looking for spares.
Thanks! -Wally

[ptlcb1]

Hey Wally,
     You have any pics of your RVFs?  Is that the one that looks like the RC-45?

[Cozzy]

i read the link, it seems fairly complicated, does modifying it with the CBR400 easier?