Hi,
My speedo stopped working the other day, so I took off the connector and tried running the bike in gear while it was on it's centre stand (saw that trick on one of the other posts) and there is no mobvement on the inner. The real conclusive proof that the cable is broken is that when I gave it a gentle tug it came out, broken near the bottom.
I assume the screw in the cover next to where the cable goes in to the front sprocket cover needs to be taken out in order to remove the outer....
The question here is, can I use a speedo cable from another type of Honda, or do I need to get one specifically for a CB1?
I need the outer and the inner as the bloody outer got a bit cut in half when i couldn't get the screw out of the sprocket cover
