Main jet needle...

HondaCB1.org Message Forums > General Category > General Discussion > Main jet needle...

Pages: [1]

« previous next »

Author

Topic: Main jet needle... (Read 586 times)

Broken070

Jr. Member

Offline

Posts: 7

Main jet needle...

« on: April 02, 2009, 10:23:47 PM »

Hey there everyone, So i just got a 90' CB1 and must say I love this bike. However I am having a problem with the clip on the main jet needle on my #4 carb coming off. Anyone know where I can get a jet kit, or a new needle to fix this? Thanks alot.


	Logged

oldsmoker

Full Member

Offline

Location: haymarket, virgina, usa

Posts: 159

Re: Main jet needle...

« Reply #1 on: April 03, 2009, 07:42:04 AM »

Dyno-Jet makes a kit for the -1, but it sounds like you already have a jet kit in it. You may want to contact them ane see if you can just order the clip. The part # is DE0001 for the E-clip.


« Last Edit: April 03, 2009, 07:47:38 AM by oldsmoker »	Logged

91cb-1

Hero Member

Offline

Location: Dublin, Ireland

Posts: 855

Re: Main jet needle...

« Reply #2 on: April 03, 2009, 10:19:01 AM »

I was just on their website and you can order replacement parts on there.


	Logged

Drewski

Hero Member

Offline

Location: Cambridge, UK

Posts: 1063

Re: Main jet needle...

« Reply #3 on: April 06, 2009, 08:21:06 AM »

I've got loads of carb spares if anything off the original set is of any use.


	Logged

Cb1 Derfull

Broken070

Jr. Member

Offline

Posts: 7

Re: Main jet needle...

« Reply #4 on: April 06, 2009, 06:41:23 PM »

Hey guys, thanks for the input. I went ahead and ordered a new set from Dyno-jet. Only $100 so might as well replace all of it.


	Logged

Pages: [1]

« previous next »