91 cb1 breaking

[91cb-1]

I am still selling my 91 cb1 in parts,
I have;
2 exhausts one standard deamon tweaked with a few scuffs, and  a non-standard exhaust,
front and rear wheels without sprocket,
Two swing arms, one standard and one NC29 swing arm (project fell through)
side plates x4 two front and two side mesh
Fully functioning Engine with crank case cover cracked
Water pump
Fuel pump
Fuel filter
one damaged tank.
and set of carbs need cleaning but running non the less

PM your e-mail for pictures and tell me a price, i just want rid of these parts at this stage so i'm reasonable on offers just need to cover P&P and labor basically, have plenty other parts i'm sure ask and, if i have it, you shall receive!

[micrawavewindow]

Hi,
      i have no idea of how to pm you but i need a radiator and fan can you help also how much for the full after market exhaust does this include down pipes thanks

[91cb-1]

full aftermarket is a one piece including down pipes for all three i'll ask €100 plus post and package where are you based? i'm not sure what postage will be but i'm in ireland i will send pics of exhaust and rad + fan once i get them off old bike!

[micrawavewindow]

hi i am in manchester england  once i have seen the pics of the exhaust i will probably buy them thanks very much

[91cb-1]

<a href="http://s729.photobucket.com/albums/ww291/91cb-1/?action=view&current=DSCF1280.jpg" target="_blank"><img src="http://i729.photobucket.com/albums/ww291/91cb-1/DSCF1280.jpg" border="0" alt="aftermarket exhaust"></a>

<a href="http://s729.photobucket.com/albums/ww291/91cb-1/?action=view&current=DSCF1281.jpg" target="_blank"><img src="http://i729.photobucket.com/albums/ww291/91cb-1/DSCF1281.jpg" border="0" alt="Aftermarket exhaust"></a>

<a href="http://s729.photobucket.com/albums/ww291/91cb-1/?action=view&current=DSCF1282.jpg" target="_blank"><img src="http://i729.photobucket.com/albums/ww291/91cb-1/DSCF1282.jpg" border="0" alt="OEM radiator and fan"></a>

<a href="http://s729.photobucket.com/albums/ww291/91cb-1/?action=view&current=DSCF1283.jpg" target="_blank"><img src="http://i729.photobucket.com/albums/ww291/91cb-1/DSCF1283.jpg" border="0" alt="OEM radiator"></a>

If these don't show up as a link just copy and paste them into your web browser and it should bring you to my photobucket page i got othe pics of items for sale up there too, exhaust should cost about €60 for P&P to england and i can't imagine the rad and fan would cost too much

[baard]

have plenty other parts i'm sure ask and, if i have it, you shall receive!

Do you have a front brake master cylinder. I'm in dire need after an unfriendly encounter with the tarmac.

Thanks

[91cb-1]

I have one it's not in the best condition a few scrapes and so forth but it will work.

[baard]

Well, my tank currently has its volume reduced by about half a litre, due to a less than flattering dent, so cosmetics aren't my first priority. Are the rubber boots and seals ok, or should I order a rebuild kit?

I'd like to have it shipped to Norway, address in PM, and if you are willing to let it go for £19 plus freight or less I'd be more or less extatic. Let me know...

Best regards,
Baard

[91cb-1]

hi i am in manchester england  once i have seen the pics of the exhaust i will probably buy them thanks very much

Hi micrawavewindow do you want the rad and fan? i gotta start shiftin stuff my shed's becoming hard to move in my da's rebuilding a WWII bike in there too, and it's "his shed"

[micrawavewindow]

no thanks tho but how much for the filler cap as long as the rubber is o how much all in

[91cb-1]

Filler cap that's just at the head set? i dunno €20 plus P&P

[BelleBot]

How much do you want for the NC29 swingarm? and does it come with the linkage?

[91cb-1]

Linkage? i'll send pics of everything that is on the swing arm, i didn't get chain tensioners with it but i got in touch with the fella i bought it off and he said he's gonna send them out to me, so you might have to wait till i get them for me to send it on to you but i would be looking for €45 plus P&P! i dunno what P&P will be i still have to get a weighing scales

[91cb-1]

Pics of nc29 swing arm
<a href="http://s729.photobucket.com/albums/ww291/91cb-1/?action=view&current=DSCF1311.jpg" target="_blank"><img src="http://i729.photobucket.com/albums/ww291/91cb-1/DSCF1311.jpg" border="0" alt="Photobucket"></a>
<a href="http://s729.photobucket.com/albums/ww291/91cb-1/?action=view&current=DSCF1312.jpg" target="_blank"><img src="http://i729.photobucket.com/albums/ww291/91cb-1/DSCF1312.jpg" border="0" alt="Photobucket"></a>
<a href="http://s729.photobucket.com/albums/ww291/91cb-1/?action=view&current=DSCF1313.jpg" target="_blank"><img src="http://i729.photobucket.com/albums/ww291/91cb-1/DSCF1313.jpg" border="0" alt="Photobucket"></a>
<a href="http://s729.photobucket.com/albums/ww291/91cb-1/?action=view&current=DSCF1314.jpg" target="_blank"><img src="http://i729.photobucket.com/albums/ww291/91cb-1/DSCF1314.jpg" border="0" alt="Photobucket"></a>
<a href="http://s729.photobucket.com/albums/ww291/91cb-1/?action=view&current=DSCF1315.jpg" target="_blank"><img src="http://i729.photobucket.com/albums/ww291/91cb-1/DSCF1315.jpg" border="0" alt="nc29 swing arm"></a>

I also have front and rear brake calipers if anyone's interested, sold the front master cylinder already but still have the rear one

[Sephi]

Looks like an NC23 swing arm.