Looking for these parts

[T. Johnson]

1989 CB-1

Insulator boots needed. I can get the B boot (outsides), but need the inside A boots.

Here's the part #. 16212-KAF-000

Also need the choker plugs. I believe theses are still produced as I have been in contact with a shop in the UK and can get them. Here's the part #'s.

total needed (3) part # 16046-KAF-000
                  (1) part # 16047-KAF-000

Question: Is it so that the 400cc inline is still produced in the Asian and European markets. I swore I saw a 2009 model 400cc CB-1 or similar displacement bike still produced by Honda.

Any help with the parts would be greatly appreciated.

Thank you,
T. Johnson       

[Kai Ju]

As you correctly noted, the A boots have been discontinued, but I think you might be able to use the B boots straight across.
I think the main difference is the clamp location feature that honda uses, i.e. a little nub on the boot that lines up with a corresponding hole on the clamp.
Convenient but not essential.

As far as the choke plungers go, what's wrong with yours ?
If broken, unsusable etc. I have a full carb assembly that needs cleaning, but I can check the plungers and see if they move freely, if so I can pull one out and see what the condition of the sealing area is.

Kai Ju