HondaCB1.org Message Forums

Classifieds => Wanted => Topic started by: scorpio47474 on January 09, 2019, 11:27:42 AM



Title: Carb Joint Kit Parts
Post by: scorpio47474 on January 09, 2019, 11:27:42 AM
Hi Guys,

I am in need of the below parts.  I have search the web but cannot find anything.  I would greatly appreciate any help.

16027-KAF-000  qty 1

16048-KR3-980  qty 2

Scott


Title: Re: Carb Joint Kit Parts
Post by: a_morti on January 09, 2019, 12:45:38 PM
https://litetek.co/Carb_Kit_Honda_CB1_NC27.html

These guys make better than OEM seals, assuming your plastic parts are ok.


Title: Re: Carb Joint Kit Parts
Post by: scorpio47474 on January 09, 2019, 01:44:41 PM
@ a_morti,

Thank you very much for the link my friend.

I just confirmed the o-rings are the issue and not the parts themselves.



Title: Re: Carb Joint Kit Parts
Post by: a_morti on January 09, 2019, 03:36:24 PM
Good stuff!

It happens due to the ethanol content in modern fuel. Those are made of a type of rubber which resists it.

Be careful with the plastic T parts anyway, but they'll probably be fine.

If you can, get a Vessel brand or other JIS PH2 size screwdriver to take the carbs apart. The screws are fine until you go at them with a normal European Philips driver, that's when the heads round out.