My second CB1 now for use on road track. All what is not needed there for sales, just ask !
On the other hand, I need Front Disc, Water pump assembly, and radiator.
Question is: do I buy a third one?
X.A.

I have a good quality radiator available.

I am about to get out of the CB- business due to a big tax bill that wasn't expected.  I have a running '98 model, and TONS of spare parts.

Tank, rear cowl- painted black
rear wheel (bent)
two sets of complete carbs
cdi
yoshimira exhaust
controls
side cover plates (some rashed for cheap)
Some guage parts
wiring harness and other miscellaneous pieces
air box (may need some work)

Not giving this stuff away and my put on ebay but prefer to deal with enthusiast that NEED it.
205-965-3350

Regarding the fuel pump, i recommend soaking it in pine sol for a about 24 hours and seeing if you can revive it.  Ol=thers here have replaced them with low flow aftermarket parts successfully, but I personally haven't had to.  Also, the fuel system takes a LONG (about 90 seconds) time to prime.  Be sure to have a hot battery when doing first start.  maybe even remove some plugs for the first time to "prime" the system to relieve the resistance of compression on the motor.  Just a suggestion.

Regarding the carbs, yest LITEK is your friend.  Order the parts if they are available.  Many 600 Hurrican carb parts will interchange.  diaphrams are getting hard to find.  Partzilla is a good tool to reference part numbers for cross reference between models. i removed the carb float bowls, floats, needles and jets and soaked them in a sonic cleaner and had great luck.  I personally left the carbs on the connection rails and did not break the fuel and air connection tubes between them.  Tons of little o rings between them, and I was lucky enough to not have them leak.

I live in Bham so not too far from you.  I have some spare parts if you are interested.  know that tanks, rear cowls, gauge clusters, and aluminum side panels, and center stands are hard to find parts.

in the us they only came in blue.

Whoa,  there was yellow offered in the US as well.  Albeit not a popular choice they did NOT sell well.  I know because we had one....

I am interested in the shifter, linkage and left foot peg & mount.  Also looking for radiator shrouds and cover, and rear axle if you have them.  Shipping to Us and Zip code 35243.

Thanks!!

I just wanted to say thanks to Ben for the great service.  Great products and service.  Thanks!!

Check part numbers for cross reference.  Many of the -1 carbs carried the same parts as the similart year 600 hurricanes did.  just FYI.  I am NOT certain if the floats were the same how ever. OOH  wait, here it is, the '87-90  honda 600 are the same floats.---http://www.partzilla.com/parts/detail/honda/HP-16013-KT7-003.html

FWIW, I have a pair of LIteck's reman's and they work great!!

Welcome to the group!!  Did you by chance see this one in your area??

http://www.hondacb1.org/forum/index.php/topic,5300.0.html

sams,

I am interested in your left side rear set if it includes the shifter and linkage.  Photos??  Can pay via paypal, and located in US 35243

I am interested in our oil sump if you are willing to part with it.  I just repled to your other post for other parts.  Thanks!! can pay via paypal.

I am interested in the shifter, linkage and left foot peg & mount.  Also looking for radiator shrouds and cover, and rear axle if you have them.  Shipping to Us and Zip code 35243.

Thanks!!

I wanted to provide some closure to this topic.  My tach hasn't worked since I bought it.  We connected it to a know working loom and it worked fine, so it was not the gauge.  The bike always ran great, but after replacing the CDI with a used one, It works great now.  Apparently, I had a failure inside the CDI box, but it affected nothing else.

I had a problem with my CDI. It worked great, but my tachometer feed from it failed.  That was the only thing.  I recently replaced it with a used one from a guy on here looking to part out his bike, and it worked perfectly.

They are removed from the top.

Thank you both for the help!!