Also Check Out

© 2014 Message Forums
September 27, 2021, 04:03:06 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Welcome to! Please register in the Forum to post messages or view attached photos.
   Home   Help Search Login Register  
Pages: [1]
Author Topic: CB-1 (Write-off) for parts - nearly complete  (Read 643 times)
Mike S
Offline Offline

Posts: 2

View Profile
« on: May 07, 2021, 03:08:18 PM »

Hello all.  I recently acquired a CB-1 (insurance write-off), nearly complete with a bunch of viable parts.

- JDM model, imported to Canada.  Labels are in Japanese. I think it's an '89.
- frame is apparently bent - Rt side tip over.  Frame paint broken near the tank / seat junction, minor tube kink.
- carb clean late April 2021, it fires right up and runs well. Have video.  52k km = 32.5k miles
- engine clean, some aluminum spray touch-ups by previous owner.  Minor scrapes on case plates.
- stock exhaust in good condition, minor damage on leading edge of can, not very noticeable
- Footpegs, brackets, shifter linkage in good condition & unbent
- Levers bent / broken, brake master cylinder is functional but mirror mount tab is mostly broken off
- Rt side aluminum side plate is broken in 3 pcs , headstock cover plate is missing.  Left side covers are intact.
- tank is clean and unrusted but has a couple of dents.  Someone destroyed their nads at the seat junction, large dent in the back of the tank... 1 small dent Lt side from bar end contact.
- Tail section is complete, has small crack near the taillight and a light scratch on top
- Front fender has a large poorly repaired crack
- airbox has some damage to bolt holes (someone mangled them opening airbox) but is functional
- wheels and tires, brakes are good.  Front fork status unknown (Bent?), seals are leaking
- Seat has minor split starting near the passenger strap
- Key works, all locks are functional
- Headlight and shell in good shape - minor surface rust at weld points
- It has a centerstand

Looking to part out as not likely viable for repair.  Everything is available, will entertain offers on the entire bike. I would post more pics but a 10% resize photo puts me at 60% of the limit here.  More pics in post #2.  HD Pics available on request, as well as start-up and running video.

Mike in the Okanagan, British Columbia.  Text 250 878-6392 (preferred) / email

* IMG_0165 10%.jpg (81.42 KB, 404x303 - viewed 141 times.)

* IMG_0206 5%.jpg (25.02 KB, 202x152 - viewed 125 times.)
« Last Edit: May 20, 2021, 05:31:49 PM by Mike S » Logged
Offline Offline

Posts: 4

View Profile
« Reply #1 on: May 08, 2021, 12:34:58 PM »

Hi Mike sent you a text, I'm in SC I would like your prices on exhaust ,carbs ,tank, rear tail & plastic underside fender ,seat ,rear sets, side stand ,
Pages: [1]
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!